鋁和鋁合金鉚釘和冷彎線材的剪切試驗標準試驗方法

Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

薄鋁合金產品剪切試驗的標準試驗方法

Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

薄鋁合金制品剪切試驗的標準試驗方法

Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

粘結尺寸石料剪切粘結強度的標準試驗方法

Standard Test Method for Shear Bond Strength of Adhered Dimension Stone

金屬對金屬粘合劑的斷裂強度的標準測試方法

Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

雙層木結構在剪力加載下粘結劑強度性能的標準試驗方法

Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

平面剪切（滾動剪切）結構板的標準試驗方法

Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)

用針環試樣測定膠粘劑剪切強度的標準試驗方法

Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

通過直接剪切測定土壤 - 土工合成 - 土工合成界面剪切強度的標準試驗方法

Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

用V形切口梁法測定復合材料剪切性能的標準試驗方法

Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

環形纏繞聚合物基復合材料圓柱面內剪切性能的標準試驗方法

Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

測定分段混凝土單元（模塊混凝土塊）之間剪切強度的標準試驗方法

Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

評估層壓木制品在高溫下粘合力的剪切強度的標準試驗方法

Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

用沖壓工具測定塑料剪切強度的標準試驗方法

Standard Test Method for Shear Strength of Plastics by Punch Tool

膠合板類型結構中通過張力加載剪切的粘合劑的強度性能的標準測試方法

Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading

航空航天玻璃夾層材料剪切強度和剪切模量的標準試驗方法

Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

航空航天玻璃夾層材料剪切強度和剪切模量的標準試驗方法

Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

熔合聚碳酸酯航空航天玻璃材料剪切強度的標準試驗方法

Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

D3931-通過壓縮載荷測定剪切剪切下間隙填充粘合劑強度的試驗方法

D3931-Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

D0905-壓縮載荷剪切下粘合強度性能的測試方法

D0905-Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

D1002-通過拉伸加載（金屬對金屬）單搭接粘合金屬試樣表觀剪切強度的標準測試方法

D1002-Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

砌體試驗方法 第3部分：初始抗剪強度的測定

Methods of test for masonry — Part 3 : Determination of initial shear strength

粘合劑 適用于非結構應用的木對木粘合 通過壓縮載荷測定剪切強度

Adhesives. Wood-to-wood adhesive bonds for non-structural applications. Determination of shear strength by compressive loading

帶拉斷心軸和凸頭的開口抽芯鉚釘 — St / St

Open end blind rivets with break pull mandrel and protruding head — St / St

鞋類 - 附件的測試方法：接觸和閉合緊固件 - 重復閉合之前和之后的剪切強度

Footwear — Test method for accessories : Touch and close fasteners — Shear strength before and after repeated closing

釬縫強度試驗方法

Method of the strength test for brazed and soldered seam

硬質泡沫塑料.剪切強度試驗方法

Rigid cellular plastics.Determination of shear strength

纖維增強塑料沖壓式剪切強度試驗方法

Fibre-reinforced plastic composites-Determination of the punch-type shear strength

厭氧膠粘劑剪切強度的測定(軸和套環試驗法)

The determination of shear strength of anaerobic adhesives using pin--and--collar specimens

電氣用非浸漬致密層壓木.第2部分:試驗方法

Non-impregnated densified laminated wood for electrical purposes.Part 2:Methods of test

道路車輛 制動襯片 盤式制動塊總成和鼓式制動蹄總成剪切強度試驗方法

Test method for shear strength of road vehicle brake linings, disc brake pad assemblies and drum brake shoe assemblies

粘扣帶

Touch and close fasteners

硅基MEMS制造技術.微鍵合區剪切和拉壓強度檢測方法

Silicon-based MEMS fabrication technology.Measurement method of cutting and pull-press strength of micro bonding area

復合材料面內剪切性能試驗方法

Test method for in-plane shear properties of composite materials

木材膠粘劑拉伸剪切強度的試驗方法

Determination of shear strength by tensile loading in wood adhesives

鞋類.粘扣帶試驗方法.反復開合前后的剪切強度

Footwear.Test methods for accessories: Touch and close fasteners.Shear strength before and after repeated closing

碳/碳復合材料剪切強度試驗方法

Test method for shear strength of C/C composites

聚氯乙烯結構泡沫板材

Poly（vinyl chloride）structural foam panel

粘合劑. 各向同性的導電粘合劑的試驗方法. 第4部分: 硬料和硬料粘合組件使用中抗剪強度與抗電阻性的測定

Adhesives - Test methods for isotropic electrically conductive adhesives - Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies

土工勘查和檢驗.土壤的實驗室檢驗.第8部分:未固結的不排水三軸試驗

Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test

土工勘查和檢驗.土壤的實驗室檢驗.第9部分:飽水土壤的三軸壓縮試驗

Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils

精細陶瓷(先進陶瓷,先進技術陶瓷). 大氣壓力下高溫下陶瓷復合材料的機械性能. 面內剪切強度的測定

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure - Determination of in-plane shear strength

膠粘劑地板和墻面覆蓋物用膠粘劑試驗方法剪切試驗

Adhesives — Test methods for adhesives for floor and wall coverings — Shear test

木結構.粘合層壓木材.物理和機械性能的測定用試驗方法

Timber structures - Glued laminated timber - Test methods for determination of physical and mechanical properties

金屬材料焊接的破壞性試驗.十字形接縫和搭接縫的抗拉試驗

Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints

汽車部件.鼓式制動器和盤式剎車蹄片.剪切強度試驗程序

Automotive parts -- Drum brake shoe assemblies and disc brake pad -- Shear test procedure

無鉛焊劑的試驗方法.第5部分:焊縫的拉伸試驗和剪切試驗方法

Test methods for lead-free solders -- Part 5: Methods for tensile tests and shear tests on solder joints

剛性細胞塑料 剪切性能的確定（ISO 1922:2018 等同）

Rigid cellular plastics - Determination of shear properties (ISO 1922:2018, IDT)