建立設備校準、標準化和檢查要求的標準實踐

Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks

聲學 環境噪聲的描述和測量

Acoustics — Description and measurement of environmental noise

互感器 第 10 部分：低功率無源電流互感器的附加要求 (IEC 61869-10:2017 (ED 1.0) MOD)

Instrument transformers, Part 10: Additional requirements for low-power passive current transformers (IEC 61869-10:2017 (ED 1.0) MOD)

結構層壓板材 尺寸和形狀的測量用試驗方法

Structural laminated veneer lumber - Method of test for measurement of dimensions and shape

與人體暴露相關的 1 Hz 至 100 kHz 的直流磁場、交流磁場和交流電場的測量 第 1 部分：測量儀器的要求 (IEC 61786-1:2013 (ED.1.0) MOD)

Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings, Part 1: Requirements for measuring instruments (IEC 61786-1:2013 (ED.1.0) MOD)

F0387-測量具有泡沫層的彈性地板覆蓋物的厚度的測試方法

F0387-Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

關于人類接觸的1 Hz至100 kHz的直流磁場, 交流磁場以及交流電領域的測量. 測量儀器的要求

Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments

高壓測試技術 測量系統

High-voltage test techniques - Measuring systems

熱環境人體工程學 - 測量物理量的儀器

Ergonomics of the thermal environment — Instruments for measuring physical quantities

光學和光學儀器 大地測量儀器的輔助裝置 三腳架

Optics and optical instruments. Ancillary devices for geodetic instruments - Tripods

工業自動化系統及集成 零件庫 測量儀器的參考詞典 注冊程序

Industrial automation systems and integration. Parts library - Reference dictionary for measuring instruments. Registration procedure

冷鏈物流 溫濕度要求與測量方法

Cold chain logistics temperature and humidity requirements and measurement methods

測量儀器檢定校準證書有效性確認技術規范

Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments

法定計量檢定機構服務規范

Service Specifications for Legal Metrology and Verification Agencies

石油產品及相關產品的檢測 紅外光譜分析 一般工作原理

Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles

射線診斷部門的圖像質量保證 第1部分：概述

Image quality assurance in diagnostic X-ray departments - Part 1: General

技術設計用基本人體測量 第1部分：人體測量定義和標志（草案）

Basic Anthropometric Measurements for Technical Design Part 1: Anthropometric Definitions and Notations (Draft)

谷類 體積密度,又稱每百升質量的測定 第3部分：常規法（草案）

Determination of bulk density of cereals, also known as mass per hectolitre Part 3: General method (draft)

光學和光學儀器 大地測量儀器的輔助設備 第2部分：三腳架

Optics and optical instruments - Ancillary devices for geodetic instruments - Part 2: Tripods

高壓直流輸電工程直流磁場測量方法

Measurement method of DC magnetic field in HVDC transmission project

330kV及以上交流架空輸電線路絕緣子串分布電壓測量導則

Guidelines for measuring distributed voltage of insulator strings on 330 kV and above AC overhead transmission lines

儀器儀表基本術語

Instruments-Vocabulary-Basic terms

電磁兼容 試驗和測量技術 供電系統及所連設備諧波、間諧波的測量和測量儀器導則

Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

工業用化學品.固體及液體的蒸氣壓在10<上標 -1>Pa至10<上標 5>Pa 范圍內的測定.靜態法

Chemical products for industrial use.Determination of vapour pressure of solids and liquids in the rang 10to 10Pa.Static method

工業用化學品.固體及液體的蒸氣壓在10<上標 -3>Pa至1Pa范圍內的測定.蒸氣壓平衡法

Chemical products for industrial use.Determinaton of vapour pressure of solids and liquids at range 10to 1 Pa.Vapour pressure balance method

印刷技術.過程控制.印刷用反射密度計的光學、幾何學和測量學要求

Graphic technology.Process control.Optical,geometrical and metrological requirements for reflection densitometers for graphic arts use

產品幾何技術規范(GPS) 表面結構 區域法 第6部分：表面結構測量方法的分類

Product Geometric Specification (GPS) Surface Structure Area Method Part 6: Classification of Surface Structure Measurement Methods

地面氣象觀測規范 電線積冰

Specifications for surface meteorological observation—Wire icing

直流輸電線路和換流站的合成場強與離子流密度的測量方法

Measurement method for total electric field strength and ion current density of DC transmission line and converter station

容積式壓縮機 驗收試驗

Displacement compressors—Acceptance tests

汽車加速行駛車外噪聲室內測量方法

Indoor measurement methods for noise emitted by accelerating motor vehicles

印刷機械 油墨干燥及固化裝置能效評價方法

Energy efficiency evaluation method for ink drying and curing equipment of printing machinery

工程振動術語和符號標準

Engineering vibration terminology and notation standard

工作場所物理因素測量 第2部分:高頻電磁場

Measurement of Physical Agents in Workplace Part 2: High Frequency Electromagnetic Field

工作場所物理因素測量 第4部分:激光輻射

Measurement of Physical Agents in Workplace Part 4: Laser Radiation

光纖傳感器第1-1部分:應變測量基于光纖布拉格光柵的應變傳感器

Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings

人體暴露下1 Hz至100 kHz直流磁場、交流磁場和交流電場的測量.第1部分:測量儀器的要求

Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments

測量從1 Hz到100 kHz的直流磁場、交流磁場和交流電場（與人體暴露有關） 第1部分：測量儀器的要求

Measurement of DC magnetic fields, AC magnetic fields and AC electric fields (relevant for human exposure) from 1 Hz to 100 kHz Part 1: Requirements for measuring instruments

工業過程測量和控制 過程設備目錄中的數據結構和元素 第1部分：測量設備的通用結構

Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Generic structures for measuring equipment

音頻 視頻和相關設備 - 功耗測定 - 第1部分:總則

Audio, video, and related equipment - Determination of power consumption - Part 1: General

校準追溯性和校準間隔要求

Requirements for Traceability of Calibrations and Calibration Intervals

kHz 至 40 GHz 范圍內低壓電氣和電子設備無線電噪聲發射測量方法的美國國家標準

American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

IEEE 正弦、非正弦、平衡或不平衡條件下電功率測量的標準定義

IEEE Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions

木材的物理和機械性能.透明小木材試樣的試驗方法.第13部分：徑向和切向收縮的測定

Physical and mechanical properties of wood - Test methods for small clear wood specimens- Part 13:Determination of radial and tangential shrinkage

木材物理機械性能 透明木材小試樣試驗方法 第 13 部分：徑向和切向收縮率的測定

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage

木材的物理和機械性能小型透明木材試樣的試驗方法第15部分:徑向和切向膨脹的測定

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling

光學和光學儀器.測地與勘測儀器的現場測試規程.第1部分:理論

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory

細氣泡技術.樣品表征的消除方法.第2部分：細氣泡消除技術

Fine bubble technology - Elimination method for sample characterization - Part 2: Fine bubble elimination techniques

機床. 測試臥式鏜床和銑床準確度的試驗條件. 第2部分: 車身可沿X軸移動的機床(落地式)

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column along the X-axis (floor type)

圓柱齒輪.實用檢驗規則.第5部分: 與齒輪測量儀器的評價相關的建議;技術勘誤表1

Cylindrical gears - Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments; Technical Corrigendum 1

人對振動的反應. 根據健康和安全要求的工作場所日常振動暴露評定用儀表和設備的指南和術語

Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety

通風機振動檢測及其限值

Fan vibration detection and its limited value

幾何產品規范（GPS） GPS測量設備的一般概念和要求

Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment

單個齒輪測量儀器的評價.第1部分:齒輪形狀工藝方法

Evaluation of instruments for the measurement of individual gears -- Part 1: Method by gear shape artifacts

簡圖用圖形符號.第8部分:測量儀表,燈和信號裝置

Graphical symbols for diagrams -- Part 8: Measuring instruments, lamps and signalling devices

吸氫合金的壓力-組成-溫度(PCT)關系用測量方法

Method for measurement of pressure-composition-temperature(PCT) relations of hydrogen absorbing alloys

吸氫合金的吸氫/解吸反應率用測量方法

Method for measurement of hydrogen absorption/desorption reaction rate of hydrogen absorbing alloys

吸氫合金的吸氫/解吸循環特性用測量方法

Method for measuremet of hydrogen absorption/desorption cycle characteristic of hydrogen absorbing alloys

聚四氟乙烯零部件尺寸的測定方法

Method for determination of dimension of polytetrafluoroethylene parts

音頻和視頻同步指南 音頻和視頻設備和系統同步的測量方法 一般的

Guideline for synchronization of audio and video. Measurement methods for synchronization of audio and video equipment and systems. General

機床測試代碼 適用于機床幾何測試的測量儀器

Test code for machine tools. Measuring instruments suitable for machine tool geometry tests

小型發動機動力設備用操作員耳朵（所受噪聲）聲級的測試規程

Operator Ear Sound Level Measurement Procedure for Small Engine Powered Equipment

幾何產品規范（GPS） 表面結構：區域特性 第70部分：材料參數（ISO 25178-70:2014）

Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014)

檢驗檢測實驗室內部校準規范

Internal Calibration Specifications for Inspection and Testing Laboratories

實驗室檢測儀器設備維護保養規范

Specifications for maintenance of laboratory testing instruments and equipment

儀器設計類論文撰寫內容規范

Writing content specification of instrument design papers

輻射防護儀器 氡和氡衰變產物測量儀器 第3部分：氡衰變產物測量儀器的具體要求

Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (Endorsed by AENOR in January of 2015.)

關于人體暴露的 1 Hz 至 100 kHz 直流磁場、交流磁場和交流電場的測量 第1部分：測量儀器的要求

Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments

幾何產品規格(GPS)表面紋理：面積 第603部分：非接觸式（相移干涉顯微鏡）儀器的標稱特性

Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.)

幾何產品規范(GPS)表面紋理：面積 第606部分：非接觸式（焦距變化）儀器的標稱特性

Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.)

石油和天然氣工業-鋁合金鉆桿螺紋連接測量

Petroleum and natural gas industries - Aluminium alloy drill pipe thread connection gauging (ISO 27627:2014) (Endorsed by AENOR in July of 2014.)

人體暴露于電場、磁場和電磁場（0 Hz 300 GHz）的測量和計算程序基本標準

Basic standard on measurement and calculation procedures for human exposure to electric@ magnetic and electromagnetic fields (0 Hz - 300 GHz); German and English version prEN 50413:2018

人體暴露于機械振動 建筑物工作場所的全身振動

Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings

Automatische Messeinrichtungen zur Ueberwachung der Luftqualitaet - Eignungspruefung@ Eignungsbekanntgabe und Zertifizierung von Messeinrichtungen zur punktfoermigen Messung der Massenkonzentration von partikelfoermigen Immissionen

Automated measuring systems for air quality monitoring - Performance test@ declaration of suitability and certification of measuring systems for point-related measurement of mass concentration for particulate air pollutants

形狀測量條件

Form measurement conditions

電學量測量設備的校準基礎

Calibration of measuring equipment for electrical quantities - Fundamentals