共找到 150 條與 多傳感器集成系統 相關的標準，共 10 頁
本文件規定了無人機低空遙感監測的多傳感器一致性檢測的基本要求、檢測條件、檢測飛行、輻射一致性檢測、幾何一致性檢測、檢測結果評價與整理。 本文件適用于以固定翼和多旋翼低空無人機為平臺的多傳感器遙感監測的輻射和幾何一致性檢測
Technical specification of multi-sensor consistency testing for unmanned aerial vehicle（UAV）borne low altitude remote sensing monitoring
本標準適用于坐標測量機（CMM）多傳感系統的準確度、特性和檢測方法
Accuracy of coordinate measuring machines Characteristics and their checking Coordinate measuring machines with multiple probing systems
Leak detection systems - Part 6: static leak detection systems in piezometric wells
本文件描述了具有線性光電響應特性的線陣、面陣和時間延遲積分（TDI)CMOS圖像傳感器（以下簡稱器件)參數及其測試方法。 本文件適用于具有線性光電響應特性的線陣、面陣和TDI器件參數測試
Integrated circuit CMOS image sensor testing method
This part of ISO 23570 specifies the interconnection of elements in the control system of machine tools and similar large pieces of industrial
Industrial automation systems and integration - Distributed installation in industrial applications - Part 1: Sensors and actuators
Cross References: IEC 60747-1:1983 IEC 60747-14-1:2000
Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensors-Pressure sensors
本文件規定了道路數據采集中不同來源的傳感器語義數據統一表達的一般要求、多源傳感器語義數據模型和多源傳感器語義數據內容。 本文件適用于高精電子地圖道路數據進行眾源采集、源數據處理、源質量評定和數據更新融合等技術環節
Unified expression of multi-source sensor semantic data in road data collection
本部分ISO 7240規定了用于建筑物火災探測系統中可復位點型多傳感器火災探測器的要求、測試方法和性能標準。該探測器在一個機械外殼內至少包含一個煙霧傳感器和至少一個其他熱傳感器，并且煙霧傳感器的信號與熱傳感器的信號相結合
Multi-sensor fire detectors for fire detection and alarm systems
本規范適用于壓電集成電路傳感器（IEPE）（Integrated Electronics Piezo Electric）放大器（以下簡稱IEPE放大器）的校準
Calibration Specification for IEPE Amplifiers
For the installation, operation, and performance of indoor air quality sensors in buildings, use of this guidance and related sensors does
Guidance on the Use of Integrated Indoor Air Quality Sensors
本標準涉及用于多種氣體物質的區分、識別和定量的多氣體傳感器。此外，多氣體傳感器可作為電子鼻，參考人類的嗅覺，用于測量和表征氣味。 多氣體傳感器的特定特征在于通過傳感器的選擇和工作模式，生成大量信號，從中使用數學方法提取應用所需的數據。通常，這需要使用已知成分的氣體樣本對測量設備（多氣體傳感器）進行
Multigas sensors - Odour-related measurements with electronic noses and their testing - Part 3
本文件規定了多傳感器數據融合的追蹤系統的基本原則、構成、技術要求
Technical requirements of tracking system for multi-sensor data fusion
Presently, monitoring membrane integrity is carried out in one of two ways. Thefirst is to try and measure a property inherent to the membrane
An On-Line, Multi-Sensor, Membrane Filtration Permeate Water Quality Monitoring System
Securing sensor systems
IEEE 1451.3-2003 傳感器和執行器的智能傳感器接口標準分布式多點系統的數字通信和傳感器電子數據表（TEDS）格式
ForewordThe main objectives of this standard are to:?? Enable plug and play at the transducer level by providing a common communication interface
Standard for a Smart Transducer Interface for Sensors and ActuatorsDigital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
